A Specialty Distributor
Call our knowledgable
Staff with your application
questions.
B-Series
Standard
Reed Relay for telecommunications
and test equipment with all standard pinnings.
Now with many BABT approved versions, this popular style of Reed Relay offers a cost effective solution to many switching applications. Available with either plastic or metal case, the standard series use higher than normal coil resistance giving low current consumption and making them ideal for many battery driven systems.
The wide range of switch options when combined with the 4.25 kVDC isolation between coil and contact makes the B-Series the obvious choice for many telecommunication applications where reliability for difficult loads is essential.
Dimensions
| Shock | at 11ms | max. | (g) | 35 (wetted 10) |
|---|---|---|---|---|
| Vibration | at 50 - 500 Hz | max. | (g) | 20 (wetted 5) |
| Operating temperature | (°C) | -20/+70 (wetted +55) | ||
| Storage temperature | (°C) | -25/+85 | ||
| Isolation coil/contact | min. | (kV) | 2.0 DC (4.25 DC / 3.0 AC at sundry diagrams) | |
| Insulation coil / contact | min. | (GOhm) | 10 | |
| Life expectancy | Dependent upon load, consult factory | |||
| Solder time | max. | 5 sec./260 °C | ||
| Cleaning | Fully sealed | |||
| Contact type | 71 | 88 | 90 | ||
|---|---|---|---|---|---|
| Contact form | A/dry | A/HG | B/C/dry | ||
| Rated Power | max. | (W) | 10 | 50 | 3 |
| Switching voltage | max. | (VDC) | 200 | 1000 | 175 |
| Switching current | max. | (A) | 0.5 | 1.0 | 0.25 |
| Carry current | (A) | 1.0 | 2.0 | 1.2 | |
| Contact resistance | max. | mOhm | 150 | 60 | 150 |
| Breakdown voltage (contact/contact) | min. | (VDC) | 250 | 1500 | 200 |
| Operating time incl. bounce | (ms) | 0.5 | 2.5 no bounce | 0.7 | |
| Release time | (ms) | 0.3 | 2.0 | 1.0 | |
Data at 140%
of the nominal voltage and 20°C.
Other switches by request.
VDC
Ohm
VDC
VDC
VDC
VDC
mW
