A Specialty Distributor
Call our knowledgable
Staff with your application
questions.
CL-
Series
Reed Relays for line sensing
The CL series is used for line sensing in telecommunication devices. It is superior to electronic solutions regarding flashover and impulse strength. Versions with low coil resistance values down to 4 Ohm and pull-in current <10 mA are available.
Characteristics:
 |
1 and 2 coil design available |
|
Sealed with UL listed epoxy |
|
Magnetic shielding |
|
High reliability |
|
BABT approved according to EN60950 |
Tolerance +/- 0.10mm (0.004inch)
| Operating temperature | (°C) | -20/+70 | |
|---|---|---|---|
| Storage temperature | (°C) | -25/+85 | |
| Isolation coil/contact | min. | (kV) | 4.25 DC / 3.0 AC(2.12 DC / 1.5 AC at diagram 20 and 21) |
| Insulation coil / contact | min. | (Ohm) | 1010 |
| Life expectancy | Dependent upon load, consult factory | ||
| Soldering time | max. | 5 sec./260 °C | |
| Cleaning | Fully sealed | ||
| Contact Type | 71 | 81 | |||
|---|---|---|---|---|---|
| Contact form | A/dry | A/dry | |||
| Rated Power | max. | (W) | 10 | 5 | |
| Switching voltage | max. | (VDC) | 200 | 90 | |
| Switching current | max. | (A) | 0.5 | 0.5 | |
| Carry current | max. | (A) | 1.0 | 1.0 | |
| Contact resistance | max. | (mOhm) | 150 | 200 | |
| Insulation resistance | min. | (Ohm) | 1010 | 1010 | |
| Breakdown voltage | min. | (VDC) | 250 | 100 | |
| Operating time incl. bounce | typ. | (ms) | 0.5 | 0.5 | |
| Release time | typ. | (ms) | 0.2 | 0.2 | |
| Shock | at 11ms | max. | (g) | 150 | 150 |
| Vibration | at 10 - 2000 Hz | max. | (g) | 10 | 10 |
Data at 140% of the nominal voltage and 20°C.
(Ohm)
(mA)
(mA)
20°
(mA)
60°
(mA)
(mH)
