Kooltronic - General Specifications for Heater Exchangers

A Specialty Distributor

Call our knowledgable
Staff with your application
questions.

Kooltronics - General Specifications for Heater Exchangers

PRECISION BALL-BEARING MOTORS: All blower motors are UL/CSA recognized and include automatic-reset thermal overload protection and double-sealed or double-shielded precision ball bearings. Special permanent lubricants perform over a broad temperature range: -200F (-290C) to 2500F (1210C). Consult KOOLTRONIC for motors designed to meet military or other extreme environmental specifications.
Tube axial fans are rated to perform at 140F (-100C) to 1580F (700C) and are designed to meet UL, CSA,and VDE.

RUGGED CONSTRUCTION: Precision-engineered heavy gauge steel construction insures that Heat Exchangers will stand up under tough applications.*

PERMANENT FILTERS: Designed to last the life of the unit, the filters included with all Heat Exchangers consist of a multi-layer grid of sturdy, corrugated aluminum in a one-piece aluminum frame. Filters must be kept free of accumulations, to prevent reduction or loss of performance and/or damage to equipment. Disposable filters are also available. Filters are not required on water-cooled models (KPHE Series).

BAKED EPOXY FINISH: Durable, baked-on gray epoxy finish is standard. Other finishes are available.*

POWER: 115 VAC or 230 VAC, 50/60Hz is standard. For other voltages and frequencies or other special requirements, consult KOOLTRONIC.*

POWER CORD: All 115VAC models are supplied with type SJT three-wire cord with plug. 230VAC units have three-wire cords without plugs for direct wiring to power source. Lengths are shown in the Series sections. Special lengths and/or plugs are available.

RUGGED CONSTRUCTION: Precision-engineered heavy gauge steel construction insures blowers stand up under tough applications.

BAKED EPOXY FINISH: Durable, baked-on gray epoxy finish is standard. Other finishes are available.

PRECISION BALL-BEARING MOTORS: All motors, whether permanent split capacitor or shaded pole, are UL/CSA recognized and include automatic-reset thermal overload protection. Designed for low temperature rise, KOOLTRONIC motors are also cooled by the fans' intake air, for maximum motor life. All motors meet Federal Specification CC-M-1807A, and include double-sealed or double-shielded precision ball bearings which meet Federal Specification FF-B-171A. Special permanent lubricants perform over a broad temperature range: -20°F (-29°C) to 250°F (121°C). Consult KOOLTRONIC for motors designed to meet military or extreme environmental specifications.

POWER: 115 VAC or 230 VAC, 50/60 Hz is standard. For multi-phase power, other voltages and frequencies or brushless DC applications, consult KOOLTRONIC..

To find out about the many more products offered by Kooltronic,
select "Info Request" from the menu on the left.

| (800) 654-4636 | (330) 725-3705 | Fax (330) 723-3448 | Fax (800) 437-8755 |
sales@rcosales.com

P.O.Box 1198
Medina, Ohio 44258

Kooltronic - General Specifications for Heater Exchangers