A Specialty Distributor
Call our knowledgable
Staff with your application
questions.
MK17- Series 
Reed Sensor for SMD mounting
Characteristics
MK17 are magnetically operated Reed proximity sensors for SMD mounting.
The sensors are supplied taped & reeled according to IEC 286 / part 3 suitable for auto-placement. The magnetic pull-in sensitivity is divided in several AT classes at 5 AT steps each.
- Lead design 1:
- Flat, straight leads for pcb mounting.
- Lead design 2:
- Flat, bent SMD leads.
- Lead design 3:
- J lead
The special features of this series are the small dimensions of only 12.5 x 2.3 x 2.3mm and the simple internal structure (low cost version).
Applications
- Electronic pcb's where all components are
surface mounted- No power-requirement sensor for low power
applications- Telecommunication applications,
e.g. hook switch in mobile and hard wired
phones- Switching element in microphones
Dimensions
Tolerance +/- 0.10mm (0.004 inch)
J-Lead
Packaging (Tape and Reel)
Contact Data Contact type 39 Contact form A/dry Rated Power max. (VA) 10 Switching voltage max. (VDC) 100 Switching current max. (A) 0.5 Carry current (A) 1.0 Contact resistance max. mOhm 150 Insulation resistance min. Ohm 109 Breakdown voltage (contact/contact) min. (VDC) 150 Operating time incl. bounce max. (ms) 0.4 Releasing time max. (ms) 0.1 Operating temperature max. (°C) -20/+130 Storage temperature max. (°C) -35/+130 Other switches by request.
Magnetic Sensitivity Sensitivity class B C D E Pull-in AT range 10-15 15-20 20-25 25-30 Available switches 39
Order information
Ordering example
MK17 - B - 1
MK17 Reed Sensor, sensitivity class B, lead design 1
To find out about the many more products offered by Meder Electronics, select
"Info Request" from the menu on the left.
| (800) 654-4636
| (330) 725-3705 | Fax (330) 723-3448 | Fax (800) 437-8755 |
sales@rcosales.com
P.O.Box 1198
Medina, Ohio 44258
sales@rcosales.com
P.O.Box 1198
Medina, Ohio 44258
Copyright © RCO
Sales Inc. All Rights Reserved