DIP-Relay

Molded DIP Reed Relays suitable for all current soldering and washing methods

The DIP Series shows a very compact design due to its low profile package and the small dimensions. This series is mostly widespread and compatible to all current brands.

Characteristics:

  • Low profile package
  • Standardized pin configurations
  • Versions with diode available
  • Versions with mercury wetted switches available
  • IC-pin compatible
  • TTL drive possible
  • 4.25 kVDC insulation at diagram 13L
  • UL approval

Dimensions

Tolerance +/- 0.10mm (0.004inch)
Dimensions in [ ] are valid for versions with magnetic screen

High Package Drawing

Flat Package Drawing

Relay Data

Operating temperature (°C) -20/+70
Storage temperature (°C) -35/+95
Isolation coil / contact min. (kV) 1.5 DC (4.25 DC / 3.0 AC at diagram 13L)
Insulation coil / contact min. (Ohm) 1011
Life expectancy Dependent upon load, please refer to factory
Soldering time/temperature max. 10 sec./260 °C
Cleaning Fully sealed

Contact Data

Contact type 71 72 75 84 90
Contact form A/B dry A/B dry A/B dry A/B dry C/dry
Rated power max. (W) 10 15 10 10 3
Switching voltage max. (VDC) 200 200 500 400 175
Switching current max. (A) 0.5 1.0 0.5 0.5 0.25
Carry current max. (A) 1.0 1.25 1.0 1.0 1.2
Contact resistance max. (mOhm) 150 150 200 150 150
Insulation resistance min. (Ohm) 1010 1010 1010 1011 109
Breakdown voltage min. (VDC) 250 250 1500 700 200
Operating time incl. bounce typ. (ms) 0.5 0.5 0.5 2.0 0.7
Releasing time typ. (ms) 0.1 0.1 0.1 0.1 1.0
Shock at 11ms max. (g) 150 150 30 50 50
Vibration max. (g)
(Hz)
10
10-2000
10
10-2000
30
50-1500
35
10-2000
30
50-2000

Data at 140% pull-in energization and 20°C. Other switches on request.

Coil Data with contact form 1A and 1B (Data at 20°C)

Contact form Contact type Diagram Nominal voltage
(VDC)
Coil resistance +/- 10%
(Ohm)
Pull-in voltage max.
(VDC)
Drop-out voltage min.
(VDC)
Maximum voltage 20°C
(VDC)
Maximum voltage 60°C (at Hg 50°C)
(VDC)
Nominal power
(mW)
1A 71
72
75
84
10/11
12/13
16
5 500(200) 3.5 0.75 22.0 14.0 50
12 1000 8.4 1.8 33.0 21.0 144
15 2000 10.5 2.2 44.0 28.5 113
24 2000 16.8 3.6 44.0 28.5 288
1B 71
72
75
84
19 5 500(200) 3.5 0.75 6.5 6.5 50
12 1000 8.4 1.8 15.6 15.6 144
15 2000 10.5 2.2 19.5 19.5 113
24 2000 16.8 3.6 31.2 30.0 288

Coil Data with contact form 2A and 1C (Data at 20°C)

Contact form Contact type Diagram Nominal voltage
(VDC)
Coil resistance +/- 10%
(Ohm)
Pull-in voltage max.
(VDC)
Drop-out voltage min.
(VDC)
Maximum voltage 20°C
(VDC)
Maximum voltage 60°C (at Hg 50°C)
(VDC)
Nominal power
(mW)
2A 71
72
75
84
21 5 200(140) 3.5 0.75 14.0 9.0 125
12 500 8.4 1.8 25.0 16.0 288
15 2000 10.5 2.2 47.0 30.5 113
24 2000 16.8 3.6 47.0 30.5 288
1C 90 51 5 200 3.5 0.75 13.0 8.0 125
12 500 8.4 1.8 22.0 14.0 288
15 2000 10.5 2.2 44.0 28.5 113
24 2000 16.8 3.6 44.0 28.5 288

Coil Data with contact form 1A and 1C (Data at 20°C)

Contact form Switch type Diagram Nominal voltage
(VDC)
Coil resistance +/- 10%
(Ohm)
Pull-in voltage max.
(VDC)
Drop-out voltage min.
(VDC)
Maximum voltage 20°C
(VDC)
Maximum voltage 60° C (at Hg 50°C)
(VDC)
Nominal power
(mW)
1A 71
72
10/11
12/13
16
high resist. type
5 1000 3.5 0.75 33.0 21.0 25
12 2000 8.4 1.8 44.0 28.5 72
1C 90 51
high resist. type
12 1000 8.4 1.8 15.6 15.6 144

Other coil resistance values on request. Data in ( ) are valid for switch 75 and 84.

Flat package

  • 1 form A standard
  • 1 form A diode 6-9
  • 1 form C standard

High package

  • 1 form A diode 2-6
  • 1 form B standard
  • 1 form B diode 2-6
  • 1 form C diode 2-6
  • 2 form A standard
  • 2 form A diode 2-6

Diagram view from component side (pitch 2.54 mm / 0.1 inch)

Options (…) options with magnetic screen (pitch 2.54 mm / 0.1 inch)

L (M) A (N) B (O)
C (P) D (Q) E (R)
F (S)

 

Contact form Casing Diagram Options
L(M) A(N) B(O) C(P) D(Q) E(R) F(S)
1A flat package 10 X X X X X
11 X X X
12 X X X
13 X
16 X
1A high package 11 X X
12 X X
13 X
1B high package 19 X X
2A high package 21 X X X X
1C flat package 51 X X
high package 51 X X X

Order information

Example for ordering

DIP12 – 1A72 – 12LHR

DIP Series, 12V coil voltage, 1 form A switch 72, diagram 12, no option, high resistance version

Part Inquiry

Your Name (required)

Your Email (required)

Your Address (required)

City (required)

State (required)

Zip (required)

I am interested in

Additional Commments

×