Magnetically operated Reed Sensor with integrated resistor
MK10 sensors are magnetically operated Reed proximity switches in which a metal film resistor can be integrated on request. The single-in-line construction can be mounted on all pcb’s. The magnetic pull-in / drop-out sensitivity is divided into two AT ranges. All standard values of 1/8 Watt resistors of the series E96 with 1% tolerance can be built in. The small dimensions are another important feature of the MK 10 series.
The integrated resistor can be used for contact protection at suitable optimization
Simple design of quasi-analog path recorders, e.g. high resolution level sensing
Banks of keys with resistance matrix
Integrated tactile switch and resistance matrix<
Tolerance +/- 0.10mm (0.004 inch)
View on component side
pitch 2.54mm (0.1 inch)
|Breakdown voltage (contact/contact)||min.||(VDC)||250|
|Operating time incl. bounce||(ms)||0.35|
Other switches by request.
|Pull-in AT range||10-15||15-20|
This data relates to unmodified Reed switches before mounting. Please refer to the respective single data sheets for sensitivity data and measurement methods for finished assemblies.
MK10 B -390
MK10 Reed Sensor, Sensitivity class B, Resistance 390 Ohm