Reed Sensor for SMD mounting
MK16 are magnetically operated Reed proximity sensors for SMD mounting.Reed proximity sensors for SMD mounting.
Lead design 1: Flat, straight leads for pcb mounting.
Lead design 2: Flat, bent SMD leads.
Lead design 3: J lead.
The sensors are supplied taped & reeled according to IEC 286 / part 3 suitable for auto-placement. The magnetic pull-in sensitivity is divided in several AT classes at 5 AT steps each.
The special features of this series are the small dimensions of only 15.6 x 2.3 x 2.3 mm achieved by the use of a low level switch with only 10 mm glass body length.<
Electronic pcb’s where all components are surface mounted
No power-requirement sensor for low power applications
Telecommunication applications, e.g. hook switch in mobile and hard wired phones
Switching element in microphones
Tolerance +/- 0.10mm (0.004 inch)
Packaging (Tape and Reel)
|Breakdown voltage (contact/contact)||min.||(VDC)||250|
|Operating time incl. bounce||(ms)||0.35|
Other switches by request.
|Pull-in AT range||10-15||15-20||20-25||25-30|
MK16 – B – 1
MK16 Reed Sensor, sensitivity class B, lead design 1