A Specialty Distributor
Call our knowledgable
Staff with your application
questions.
TCR-Series
Reed Relay, pin compatible to electro-mechanical standard PC-relay with 2 change over switches
The TCR Relay series was designed to replace the electro-mechanical 16-pin Dual-in-Line relays in telecom applications. The relays are 100% pin compatible. TCR Relays are available with dry reed switches as well as mercury-wetted switches (form A).
 |
Sealed with epoxy resin |
|
Highest reliability |
|
Up to 4.25 kVDC isolation voltage |
|
Washable |
Tolerance +/- 0.10mm (0.004 inch)
| Shock | at 11ms | max. | (g) | 50 (wetted 10) |
|---|---|---|---|---|
| Vibration | at 50 - 500 Hz | max. | (g) | 30 (wetted 5) |
| Operating temperature | (°C) | -20/+70 (wetted +55) | ||
| Storage temperature | (°C) | -25/+85 | ||
| Isolation coil/contact | min. | (kVDC) | 4.0 | |
| Insulation coil / contact | min. | (GOhm) | 10 | |
| Life expectancy | dependent upon load, consult factory | |||
| Solder time/temperature | max. | 5 sec./260°C | ||
| Cleaning | Fully sealed | |||
| Contact type | 71 | 75 | 88 | 90 | ||
|---|---|---|---|---|---|---|
| Contact form | A/dry | A/dry | A/Hg | C/dry | ||
| Rated power | max. | (W) | 10 | 10 | 50 | 3 |
| Switching voltage | max. | (VDC) | 200 | 500 | 1000 | 175 |
| Switching current | max. | (A) | 0.5 | 0.5 | 1 | 0.25 |
| Carry current | (A) | 1.0 | 1.0 | 2 | 1.2 | |
| Contact resistance | max. | (mOhm) | 150 | 200 | 60 | 150 |
| Breakdown voltage | min. | (VDC) | 250 | 1500 | 1500 | 200 |
| Operating time incl. bounce | (ms) | 0.5 | 0.5 | 2.5 no bounce | 0.7 | |
| Releasing time | (ms) | 0.1 | 0.1 | 2 | 1 | |
Data at 140% of the nominal voltage and 20°C.
VDC
Ohm
VDC
VDC
VDC
VDC
mW
wetted
