| This is not all inclusive |
| If you cannot find a part please call: |
| 800-654-4636 |
| |
| Part Number |
Description |
| 120A10 |
120 VAC, 10 Amp, AC Control Solid State Relay (SSR) |
| 120A25 |
120 VAC, 25 Amp, AC Control Solid State Relay (SSR) |
| 120D10 |
120 VAC, 10 Amp, DC Control Solid State Relay (SSR) |
| 120D25 |
120 VAC, 25 Amp, DC Control Solid State Relay (SSR) |
| 120D3 |
120 VAC, 3 Amp, DC Control Solid State Relay (SSR) |
| 120D45 |
120 VAC, 45 Amp, DC Control Solid State Relay (SSR) |
| 240A10 |
240 VAC, 10 Amp, AC Control Solid State Relay (SSR) |
| 240A25 |
240 VAC, 25 Amp, AC Control Solid State Relay (SSR) |
| 240A45 |
240 VAC, 45 Amp, AC Control Solid State Relay (SSR) |
| 240D10 |
240 VAC, 10 Amp, DC Control Solid State Relay (SSR) |
| 240D10-17 |
240 VAC, 10 Amp, DC Control Solid State Relay (SSR), Replacement Part Only |
| 240D25 |
240 VAC, 25 Amp, DC Control Solid State Relay (SSR) |
| 240D25-17 |
240 VAC, 25 Amp, DC Control Solid State Relay (SSR), Replacement Part Only |
| 240D25-18 |
240 VAC, 25 Amp, DC Control Solid State Relay (SSR), VDE-approved Optocoupler |
| 240D3 |
240 VAC, 3 Amp, DC Control Solid State Relay (SSR) |
| 240D30-HS |
240 VAC, 30 Amp, DC Control Solid State Relay (SSR), with integrated heatsink |
| 240D45 |
240 VAC, 45 Amp, DC Control Solid State Relay (SSR) |
| 240D45-17 |
240 VAC, 45 Amp, DC Control Solid State Relay (SSR), Replacement Part Only |
| 240Di10 |
240 VAC, 10 Amp, DC Control Solid State Relay (SSR), with LED Indicator |
| 240Di25 |
240 VAC, 25 Amp, DC Control Solid State Relay (SSR) with LED Indicator |
| 240Di45 |
240 VAC, 45 Amp, DC Control Solid State Relay (SSR) with LED Indicator |
| 380D25 |
380 VAC, 25 Amp, DC Control Solid State Relay (SSR) |
| 380D45 |
380 VAC, 45 Amp, DC Control Solid State Relay (SSR) |
| 480D10-12 |
480 VAC, 10 Amp, DC Control Solid State Relay (SSR), Transient Proof |
| 480D15-12 |
480 VAC, 15 Amp, DC Control Solid State Relay (SSR), Transient Proof |
| 480D25-12 |
480 VAC, 25 Amp, DC Control Solid State Relay (SSR), Transient Proof |
| 480D25-HS |
480 VAC, 25 Amp, DC Control Solid State Relay (SSR), with integrated heatsink |
| 480D45-12 |
480 VAC, 45 Amp, DC Control Solid State Relay (SSR), Transient Proof |
| 575D15-12 |
575 VAC, 15 Amp, DC Control Solid State Relay (SSR), Transient Proof |
| 575D30-HS |
575 VAC, 30 Amp, DC Control Solid State Relay (SSR), with integrated heatsink |
| 575D45-12 |
575 VAC, 45 Amp, DC Control Solid State Relay (SSR), Transient Proof |
| 575Di45-12 |
575 VAC, 45 Amp, DC Control Solid State Relay (SSR) with LED Indicator, Transient Proof |
| AC24AT |
ISA Bus Serial Port RS422/485, Isolated |
| AC28 |
ISA Bus To Pamux Bus Adapter |
| AC37 |
ISA Bus High Speed Serial Co-processor, RS-485 |
| AC422AT |
ISA Bus Serial Port RS422/485, Non-isolated |
| AC5 |
ISA Bus To Card Edge I/O Rack With 6-ft Cable |
| AC7 |
RS-232 to 422/485 Converter |
| AC7A |
RS-232 to RS-422/485 Converter 120 VAC |
| AC7B |
RS-232 to RS-422/485 Converter 220 VAC |
| AD10T2 |
G1 100 Ohm RTD Analog Input Isolated |
| AD11 |
G1 -5 to +5 VDC Analog Input |
| AD11T |
G1 -5 to +5 VDC Analog Input, Isolated |
| AD12 |
G1 -10 to +10 VDC Analog Input |
| AD12T |
G1 -10 to +10 VDC Analog Input, Isolated |
| AD13T |
G1 0 to 100 mV Analog Input, Isolated |
| AD14T |
G1 10 Ohm RTD Analog Input, Isolated |
| AD15T |
G1 28 to 140 VAC Analog Input, Isolated |
| AD16T |
G1 0 to 5 Amp Analog Input, Isolated |
| AD17T |
G1 Type R or S Thermocouple Input, Isolated |
| AD18T |
G1 Type T Thermocouple Input, Isolated |
| AD19T |
G1 Type E Thermocouple Input, Isolated |
| AD2T |
G1 0 to 20 mA Analog Input, Isolated |
| AD3 |
G1 4 to 20 mA Analog Input |
| AD3T |
G1 4 to 20 mA Analog Input, Isolated |
| AD4 |
G1 ICTD Analog Input |
| AD5T |
G1 Type J Thermocouple Input, Isolated |
| AD6 |
G1 0 to +5 VDC Analog Input |
| AD6HS |
G1 0 to +5 VDC Analog Input, High Speed |
| AD6T |
G1 0 to +5 VDC Analog Input, Isolated |
| AD7 |
G1 0 to +10 VDC Analog Input |
| AD8T |
G1 Type K Thermocouple Input, Isolated |
| AD9T |
G1 0 to 50 mV Analog Input, Isolated |
| B3000-B |
SNAP Analog/Digital Brain, mistic Protocol |
| B3000-B-OMUX |
SNAP Analog/Digital Brain, Optomux Protocol |
| B4 |
32-channel Digital Brain Pamux |
| BRICKSTRAP |
Bus Bar For Brick Base |
| DA3 |
G1 4-20 mA Analog Output |
| DA3T |
G1 4-20 mA Analog Output, Isolated |
| DA4 |
G1 0-5 VDC Analog Output |
| DA4T |
G1 0-5 VDC Analog Output, Isolated |
| DA5 |
G1 0-10 VDC Analog Output |
| DA6 |
G1 -5 to +5 VDC Analog Output |
| DA7 |
G1 -10 to +10 VDC Analog Output |
| DA7T |
G1 -10 to +10 VDC Analog Output, Isolated |
| DA8 |
G1 0-20 mA Analog Output |
| DC200MP |
MP Model, 200 VDC, 1 Amp, DC Control Solid State Relay (SSR) |
| DC200P |
P Model, 200 VDC, 1 Amp, DC Control Solid State Relay (SSR) |
| DC60MP |
MP Model, 60 VDC, 3 Amp, DC Control Solid State Relay (SSR) |
| DC60P |
P Model, 60 VDC, 3 Amp, DC Control Solid State Relay (SSR) |
| DC60S3 |
60 VDC, 3 Amp, DC Control Solid State Relay (SSR) |
| DC60S5 |
60 VDC, 5 Amp, DC Control Solid State Relay (SSR) |
| E1 |
16-channel Digital Optomux Brain Board for Serial and Ethernet Networks |
| E2 |
16-channel Analog Optomux Brain Board for Serial and Ethernet Networks |
| FACTORYFLOOR |
FactoryFloor Software |
| FUSE.125B |
1/8 Amp Fuse Analog I/O Channel (10 PACK) |
| FUSE01B |
1 Amp Fuse G1 Digital Logic Power (10 PACK) |
| FUSE01G4B |
1 Amp Fuse G4 Digital Rack Logic PWR & Brick Reg G4 (10 PACK) |
| FUSE02B |
2 Amp Fuse G1 Analog Logic Power (10 PACK) |
| FUSE05B |
5 Amp Fuse STD Digital Output Modules (10 PACK) |
| FUSEG4B |
4 Amp Fuse for G4 (10 PACK) |
| G4 FUSE CLIP |
G4 Fuse Retaining Clip 10 Pack |
| G4 FUSE SOCKETS |
G4 FUSE SOCKET 100-PACK |
| G4AC5 |
ISA Bus To Header I/O Rack With 6-ft Cable |
| G4AD10 |
G4 100 Ohm Platinum RTD Analog Input |
| G4AD11 |
G4 -5 to +5 VDC Analog Input |
| G4AD12 |
G4 -10 to +10 VDC Analog Input |
| G4AD16 |
G4 0 to +5 Amp AC/DC Analog Input |
| G4AD25 |
G4 0 to 100 VDC/VAC Analog Input |
| G4AD3 |
G4 4 to 20 mA Analog Input |
| G4AD4 |
G4 ICTD Temperature Analog Input |
| G4AD5 |
G4 Type J Thermocouple Analog Input |
| G4AD6 |
G4 0 to +5 VDC Analog Input |
| G4AD6HS |
G4 0 to +5 VDC Analog Input, High Speed |
| G4AD7 |
G4 0 to +10 VDC Analog Input |
| G4AD8 |
G4 Type K Thermocouple Analog Input |
| G4AD9 |
G4 0 to +50 mV Analog Input |
| G4BATT32 |
REPLACEMENT PART FOR G4 CONTROLLERS |
| G4D32EB2 |
Ethernet I/O 32-Channel G4 Digital OptoMMP Brain, Rack, and Cover |
| G4D32EB2-UPG |
Ethernet I/O Upgrade for G4D32RS Digital Rack |
| G4D32RS |
Remote Digital 32-channel I/O Unit Mistic Protocol |
| G4DA3 |
G4 4-20 mA Analog Output |
| G4DA4 |
G4 0 to +5 VDC Analog Output |
| G4DA5 |
G4 0 to +10 VDC Analog Output |
| G4DA6 |
G4 -5 to +5 VDC Analog Output |
| G4DA7 |
G4 -10 to +10 VDC Analog Output |
| G4DA8 |
G4 0-20 mA Analog Output |
| G4EB2 |
Ethernet I/O Upgrade for B4 Brain |
| G4IAC15 |
G4 AC Input 90-140 VAC/VDC, 15 VDC Logic |
| G4IAC15A |
G4 AC Input 180-280 VAC/VDC, 15 VDC Logic |
| G4IAC24 |
G4 AC Input 90-140 VAC/VDC, 24 VDC Logic |
| G4IAC24A |
G4 AC Input 190-280 VAC/VDC, 24 VDC Logic |
| G4IAC5 |
G4 AC Input 90-140 VAC/VDC, 5 VDC Logic |
| G4IAC5A |
G4 AC Input 180-280 VAC/VDC, 5 VDC Logic |
| G4IAC5L |
G4 AC Input 90-140 VAC/VDC, 5 VDC Logic, Low Impedance |
| G4IAC5MA |
G4 AC Input 90-140 VAC/VDC, 5VDC Logic, with Manual/Auto Switch |
| G4IDC15 |
G4 DC Input 10-32 VDC, 15 VDC Logic |
| G4IDC24 |
G4 DC Input 10-32 VDC, 24 VDC Logic |
| G4IDC5 |
G4 DC Input 10-32 VDC, 5 VDC Logic |
| G4IDC5B |
G4 DC Input 4-16 VDC, 5VDC Logic High Speed |
| G4IDC5D |
G4 DC Input 2.5-28 VDC, 5 VDC Logic |
| G4IDC5G |
G4 DC Input 35-60 VDC, 5 VDC Logic |
| G4IDC5K |
G4 DC Input 2.5-16 VDC, 5 VDC Logic, Very High Speed |
| G4IDC5MA |
G4 DC Input 10-32 VDC, 5 VDC Logic with Manual/Auto Switch |
| G4IDC5Q |
G4 DC Input 2.5-16 VDC, 5 VDC Logic, 2-channel Quadrature |
| G4IDC5-SW |
G4 DC Input - DC voltage, self-powered, normally open |
| G4IDC5-SWNC |
G4 DC Input - DC voltage, self-powered, normally closed |
| G4IOR |
Remote Panel Interface Mistic Protocol |
| G4-MOD-SOCKETS |
G4 MODULE SOCKET 100-PACK |
| G4OAC15 |
G4 AC Output 12-140 VAC, 15 VDC Logic |
| G4OAC15A |
G4 AC Output 24-280 VAC, 15 VDC Logic |
| G4OAC24 |
G4 AC Output 12-140 VAC, 24 VDC Logic |
| G4OAC24A |
G4 AC Output 24-280 VAC, 24 VDC Logic |
| G4OAC24AMA |
G4 AC OUTPUT 12-280 VAC, 24 VDC LOGIC WITH HOA/SW |
| G4OAC5 |
G4 AC Output 12-140 VAC, 5 VDC Logic |
| G4OAC5A |
G4 AC Output 24-280 VAC, 5 VDC Logic |
| G4OAC5A5 |
G4 AC Output, 24-280 VAC, 5 VDC Logic, Normally Closed |
| G4OAC5A5FM |
G4 AC Output 24-280 VAC, 5 VDC Logic, Normally Closed, Factory Mutual Approved |
| G4OAC5AFM |
G4 AC Output 24-280 VAC, 5 VDC Logic, Factory Mutual Approved |
| G4OAC5AMA |
G4 AC Output 24-280 VAC, 5 VDC Logic, with manual/auto switch |
| G4OAC5FM |
G4 AC Output 12-140 VAC, 5 VDC Logic, Factory Mutual Approved |
| G4OAC5MA |
G4 AC Output 12-140 VAC, 5 VDC Logic with Manual/Auto Switch |
| G4ODC15 |
G4 DC Output 5-60 VDC, 15 VDC Logic |
| G4ODC24 |
G4 DC Output 5-60 VDC, 24 VDC Logic |
| G4ODC24A |
G4 DC Output 5-200 VDC, 24 VDC Logic |
| G4ODC5 |
G4 DC Output 5-60 VDC, 5 VDC Logic |
| G4ODC5A |
G4 DC Output 5-200 VDC, 5 VDC Logic |
| G4ODC5AFM |
G4 DC Output 5-200 VDC, 5 VDC Logic, Factory Mutual Approved |
| G4ODC5FM |
G4 DC Output 5-60 VDC, 5 VDC Logic, Factory Mutual Approved |
| G4ODC5MA |
G4 DC Output 5-60 VDC, 5 VDC Logic with Manual/Auto Switch |
| G4ODC5R |
G4 Reed Relay Output, 5 VDC logic, normally open |
| G4ODC5R5 |
G4 Reed Relay Output, 5 VDC logic, normally closed |
| G4ODC5R5FM |
G4 Reed Relay Output, 5 VDC logic, normally closed, Factory Mutual approved |
| G4ODC5RFM |
G4 Reed Relay Output, 5 VDC logic, normally open, Factory Mutual approved |
| G4PB16 |
G4 16-channel I/O Module Rack |
| G4PB16H |
G4 16-channel Mounting Rack with Header Connector |
| G4PB16HC |
G4 16-channel Rack with Header Connector and Common Terminal Block |
| G4PB16I |
G4 16-channel I/O Module Rack Isolated Control |
| G4PB16T |
G4 16-channel I/O Module Rack with Terminal Strip |
| G4PB24 |
G4 24-channel I/O Module Rack |
| G4PB32DEC |
G4 32-channel I/O Module Rack for DEC Computers |
| G4PB32H |
G4 32-channel Rack W/header Connector For B4 Brain |
| G4PB4 |
G4 Digital 4-Channel Mounting Rack |
| G4PB4R |
G4 4-channel Output Module Rack |
| G4PB8 |
G4 8-channel I/O Module Rack |
| G4PB8H |
G4 8-channel Mounting Rack with Header Connector |
| G4-PEM-NUTS |
G4 PEM NUTS 100-PACK |
| G4RCOMMKIT |
Remote Brick Communication Kit |
| G4REG |
Brick Power Regulator |
| G4STRAPB |
G4 16-Position Strap for Single Rack, Red (10-Pack) |
| G4SWIN |
G4 Digital Input Switch, 5, 15, 24 VDC Logic |
| G4SWOUT |
G4 Digital Output Switch, 250 VAC |
| G4TERMR |
Remote Brick Terminator |
| GROOV-AR1-BASE |
groov Edge Appliance |
| GROOV-LIC-ENT |
groov Solo to Enterprise |
| GROOV-MNT10YR |
groov View ten-year maintenance |
| GROOV-MNT1YR |
groov View one-year maintenance |
| GROOV-MNT3YR |
groov View three-year maintenance |
| GROOV-SVR-WIN-BASE |
groov Server for Windows Solo |
| HH1.5 |
1.5-ft Header To Header Cable |
| HH10 |
10-ft Header To Header Cable |
| HH4 |
4-ft Header To Header Cable |
| HH6 |
6-ft Header To Header Cable |
| HH8 |
8-ft Header To Header Cable |
| IAC15 |
G1 AC Digital Input, 90-140 VAC, 15 VDC Logic |
| IAC15A |
G1 AC Digital Input 180-280 VAC, 15 VDC Logic |
| IAC24 |
G1 AC Digital Input, 90-140 VAC, 24 VDC Logic |
| IAC24A |
G1 AC Digital Input, 180-280 VAC, 24 VDC Logic |
| IAC5 |
G1 AC Digital Input, 90-140 VAC, 5 VDC Logic |
| IAC5A |
G1 AC Digital Input, 180-280 VAC, 5 VDC Logic |
| IAC5AQ |
Quad Pak 4-channel AC/DC Input 180-280 VAC/VDC, 5 VDC Logic |
| IAC5P |
Flat Pak Input Module, 90-140 VAC/VDC |
| IAC5Q |
Quad Pak 4-channel AC/DC Input 90-140 VAC/VDC, 5 VDC Logic |
| ICTD |
Temperature Probe For ICTD Analog Input Modules |
| ICTD-P3 |
Immersion ICTD Temperature Probe, 1/4-inch Diameter |
| IDC15 |
G1 DC or AC Digital Input, 10-32 VDC or 12-32 VAC, 15 VDC Logic |
| IDC24 |
G1 DC or AC Digital Input, 10-32 VDC or 12-32 VAC, 24 VDC Logic |
| IDC5 |
G1 DC or AC Digital Input, 10-32 VDC or 12-32 VAC, 5 VDC Logic |
| IDC5B |
G1 DC or AC Digital Input, 4-16 VDC/VAC, 5 VDC Logic, High Speed |
| IDC5BQ |
Quad Pak 4-channel DC Input 4-16 VDC, 5 VDC Logic, High Speed |
| IDC5D |
G1 DC Digital Input, 2.5-28 VDC, 5 VDC Logic |
| IDC5G |
G1 DC or AC Digital Input, 35-60 VDC/VAC, 5 VDC Logic |
| IDC5P |
Flat Pak Input Module, 10-32 VDC or 12-32 VAC |
| IDC5Q |
Quad Pak 4-channel AC/DC Input, 12-32 VAC/10-32 VDC, <br/>5 VDC Logic |
| INPUT SWITCH |
G1 Digital Input Switch, 5, 15, or 24 VDC Logic |
| JUMPERS |
JUMPERS, QTY 10 |
| LED-SPCV-LV100W |
Networkable Constant Voltage LED Dimmer, Serial Modbus/DMX, Pushbutton, Rated 100W Low Voltage (12/24 V) |
| M4SENET-100 |
Ethernet Card for M4 Series Controllers and FactoryFloor systems |
| MP120D2 |
MP Model, 120 VAC, 2 Amp, DC Control Solid State Relay (SSR) |
| MP120D4 |
Mp Model, 120 VAC, 4 Amp, DC Control Solid State Relay (SSR) |
| MP240D2 |
MP Model, 240 VAC, 2 Amp, DC Control Solid State Relay (SSR) |
| MP240D4 |
MP Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR) |
| MP240D4-17 |
MP Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR), Replacement Part Only |
| MP380D4 |
MP Model, 380 VAC, 4 Amp, DC Control Solid State Relay (SSR) |
| OAC15 |
G1 AC Digital Output, 12-140 VAC, 15 VDC Logic |
| OAC15A |
G1 AC Digital Output, 24-280 VAC, 15 VDC Logic |
| OAC24 |
G1 AC Digital Output, 12-140 VAC, 24 VDC Logic |
| OAC24A |
G1 AC Digital Output, 24-280 VAC, 24 VDC Logic |
| OAC24H |
G1 AC Digital Output 24-280 VAC, 24 VDC Logic, High Current |
| OAC5 |
G1 AC Digital Output, 12-140 VAC, 5 VDC Logic |
| OAC5A |
G1 AC Digital Output, 24-280 VAC, 5 VDC Logic |
| OAC5A5 |
G1 AC Digital Output, 24-280 VAC, 5 VDC logic, normally closed |
| OAC5ADC |
Ac Output Module |
| OAC5H |
G1 AC Digital Output, 24-280 VAC, 5 VDC logic, High Current |
| OAC5P |
Flat Pak Output Module, 12-140 VAC |
| OAC5Q |
Quad Pak 4-channel AC Output 12-280 VAC, 5 VDC Logic |
| OD10 |
10-ft Edge To Header Cable |
| OD2 |
2-ft Edge To Header Cable |
| OD4 |
4-ft Edge To Header Cable |
| OD6 |
6-ft Edge To Header Cable |
| ODC15 |
DC Output, 5-60 VDC, 15 VDC Logic |
| ODC15A |
DC Output, 5-200 VDC, 15 VDC Logic |
| ODC24 |
DC Output, 5-60 VDC, 24 VDC Logic |
| ODC24A |
DC Output 5-200 VDC, 24 VDC Logic |
| ODC5 |
DC Output, 5-60 VDC, 5 VDC Logic |
| ODC5A |
DC Output, 5-200 VDC, 5 VDC Logic |
| ODC5AQ |
Quad Pak 4-channel DC Output 5-200 VDC, 5 VDC Logic |
| ODC5P |
Flat Pak output module, 5-60 VDC |
| ODC5Q |
Quad Pak 4-channel DC Output 5-60 VDC, 5 VDC Logic |
| ODC5R |
Reed Relay Output, 5 VDC Logic |
| OPTODATALINK |
OptoDataLink |
| OPTOEMU-ACT-0750-050 |
Current Transformer, Split Core, 50 A, 0.333 VAC, 0.75 inch (1.91 cm) Inner Diameter |
| OPTOEMU-ACT-0750-100 |
Current Transformer, Split Core, 100 A, 0.333 VAC, 0.75 inch (1.91 cm) Inner Diameter |
| OPTOEMU-ACT-0750-250 |
Current Transformer, Split Core, 250 A, 0.333 VAC, 0.75 inch (1.91 cm) Inner Diameter |
| OPTOEMU-CTS-0750-150 |
Current Transformer, Split Core, 0.333V, 150A, 0.75 inch (1.91 cm) Inner Diameter |
| OPTOEMU-CTS-0750-70 |
Current Transformer, Split Core, 0.333V, 70A, 0.75 inch (1.91 cm) Inner Diameter |
| OPTOEMU-CTS-1250-400 |
Current Transformer, Split Core, 0.333V, 400A, 1.25 inch (3.18 cm) Inner Diameter |
| OPTOEMU-CTS-2000-600 |
Current Transformer, Split Core, 0.333V, 600A, 2 inch (5.08 cm) Inner Diameter |
| OPTOEMU-PT600 |
Auxiliary Box for OptoEMU Sensor with Stepdown Power Transformer & Fusible Disconnect |
| OPTOEMU-SNR-DR2 |
Energy monitoring unit with Demand Response capability (wired Ethernet) |
| OPTOOPCSERVER |
OptoOPCServer |
| OPTO-P1-40P |
Digital I/O Carrier Board for Raspberry Pi |
| OPTO-P1-STARTERKIT-1 |
Digital I/O for Raspberry Pi Starter Kit (AC/DC) |
| OUTPUT SWITCH |
Output Switch, 250 VAC |
| P120D2 |
P Model, 120 VAC, 2 Amp, DC Control Solid State Relay (SSR) |
| P120D4 |
P Model, 120 VAC, 4 Amp, DC Control Solid State Relay (SSR) |
| P240D2 |
P Model, 240 VAC, 2 Amp, DC Control Solid State Relay (SSR) |
| P240D4 |
P Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR) |
| P240D4-17 |
P Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR), Replacement Part Only |
| PACCONTROLPRO |
PAC Control Professional |
| PACDISPLAYPRO |
PAC Display Professional |
| PACPROJECTPRO |
PAC Project Professional |
| PACTERMSSD |
PAC Terminal Secure Strategy Distribution (SSD) |
| PB16A |
G1 16-channel I/O Module Rack |
| PB16AH |
G1 16-channel Analog Mounting Rack |
| PB16C |
G1 16-channel I/O Module Rack, Edge Connector, Extra Terminal Strip |
| PB16H |
G1 16-channel Rack with Header Connector |
| PB16HC |
G1 16-channel Rack with Header Connector, Extra Terminal Connector |
| PB16HQ |
Quad Pak 4-module Position Mounting Rack |
| PB16T |
G1 16-channel I/O Module Rack with 2 Barrier Strips |
| PB24 |
G1 24-channel I/O Module Rack |
| PB24HQ |
Quad Pak 6-module Position Rack With Header Connector |
| PB24Q |
Quad Pak 6-module Position Rack |
| PB32DEC |
Quad Pak 8-module Position Rack |
| PB32HQ |
Quad Pak 8-module Rack with Header Connector for G4EB2 or B4 Brain |
| PB4 |
G1 4-channel I/O Module Rack with 2 Barrier Strips |
| PB4AH |
G1 4-channel Analog Mounting Rack |
| PB4H |
G1 4-channel Rack with Header Connector |
| PB4MOA |
4-channel Switch Assembly |
| PB4R |
G1 4-channel Isolated Output-only Module Rack |
| PB8 |
G1 8-channel I/O Module Rack |
| PB8AH |
G1 8-channel Analog Mounting Rack |
| PB8H |
G1 8-channel Rack with Header Connector |
| PBSA |
5 VDC Power Supply for Digital I/O Mounting Racks, 120 VAC input |
| PBSB |
5 VDC Power Supply for Digital I/O Mounting Racks, 220 VAC input |
| PBSC |
5 VDC Power Supply for Digital I/O Mounting Racks, 12/24 VDC input |
| PCI-AC5 |
PCI Adapter Card for Direct I/O |
| PCI-AC51 |
PCI Adapter Card for PAMUX |
| PCIe-AC5 |
PCI Express Adapter Card for Direct I/O |
| PCIe-AC51 |
PCI Express Adapter card for Pamux |
| SAFETY COVER |
Solid State Relay (SSR) Cover for Power Series Standard Model |
| SBTA |
Single Brick Terminal Adapter |
| SNAP-AIARMS |
SNAP 2-Ch 0-10 amp RMS Analog Input Module |
| SNAP-AIARMS-i |
SNAP Isolated 2-Ch 0-10 amp RMS Analog Input Module |
| SNAP-AIARMS-i-FM |
SNAP Isolated 2-Ch 0-10 amp RMS Analog Input Module, Factory Mutual Approved |
| SNAP-AICTD |
SNAP 2-Ch Analog Temperature Input Module - ICTD |
| SNAP-AICTD-4 |
SNAP 4-Ch Analog Temperature Input Module - ICTD |
| SNAP-AICTD-8 |
SNAP 8-Ch Analog Temperature Input Module - ICTD |
| SNAP-AILC |
SNAP Load Cell Input Module, 10 VDC Excitation, 2 or 3 mV/V Input Sensitivity |
| SNAP-AILC-2 |
SNAP Load Cell Input Module, 10 VDC Excitation, 3 or 4 mV/V Input Sensitivity |
| SNAP-AIMA |
SNAP 2-Ch -20mA to +20mA Analog Current Input Module |
| SNAP-AIMA2-i |
SNAP 2-Ch Isolated -1 mA to +1 mA Analog Current Input Module |
| SNAP-AIMA-32 |
SNAP 32-Ch -20mA to +20mA Analog Current Input Module |
| SNAP-AIMA-32-FM |
SNAP 32-Ch -20mA to +20mA Analog Current Input Module, Factory Mutual Approved |
| SNAP-AIMA-4 |
SNAP 4-Ch -20mA to +20mA Analog Current Input Module |
| SNAP-AIMA-8 |
SNAP 8-Ch -20mA to +20mA Analog Current Input Module |
| SNAP-AIMA-HDB |
Breakout Board for SNAP-AIMA-32 Analog Input Module |
| SNAP-AIMA-HDB-FM |
Breakout Board for SNAP-AIMA-32 Analog Input Module, Factory Mutual Approved |
| SNAP-AIMA-i |
SNAP 2-Ch Isolated -20 mA to +20 mA Analog Current Input Module |
| SNAP-AIMA-iH |
Isolated two-channel analog current input, HART communication, 4-20 mA |
| SNAP-AIMA-iSRC |
SNAP 2-Ch Isolated -20 to +20 mA Analog Current Input Module with Loop Sourcing |
| SNAP-AIMA-iSRC-FM |
SNAP 2-Ch Isolated -20 to +20 mA Analog Current Input Module with Loop Sourcing, Factory Mutual Approved |
| SNAP-AIMV2-4 |
SNAP 4-Ch -50 to +50 mV Analog Input Module |
| SNAP-AIMV-4 |
SNAP 4-Ch -150 to +150 mV Analog Input Module |
| SNAP-AIPM |
Single-Phase Power Monitoring Module |
| SNAP-AIPM-3 |
Three-phase Power Monitoring Module, 85-300 V RMS and 0-5 A RMS Inputs for Each Phase |
| SNAP-AIPM-3V |
Three-phase Power Monitoring Module, 85-300 V RMS and 0-0.333 VAC CT Inputs for Each Phase |
| SNAP-AIR400K-8 |
SNAP 8-Ch Analog Resistor/thermistor Input, 400 K Ohms |
| SNAP-AIR40K-4 |
SNAP 4-Ch Analog Thermistor Input Module |
| SNAP-AIRATE |
SNAP 2-Ch 0-25,000 Hz Analog Rate Input Module |
| SNAP-AIRATE-HFi |
SNAP Isolated 2-Ch Analog Frequency Input, 2 Hz to 500 kHz or 20 Hz to 500 kHz |
| SNAP-AIRTD |
SNAP 2-Ch 100-Ohm Platinum RTD Analog Temperature Input Module |
| SNAP-AIRTD-10 |
SNAP 2-Ch 10-Ohm Copper RTD Analog Temperature Input |
| SNAP-AIRTD-1K |
SNAP 2-channel 1000 Ohm Platinum RTD Analog Temperature Input Module |
| SNAP-AIRTD-8U |
SNAP 8-Ch Multifunction RTD/Resistance Analog Temperature Input Module |
| SNAP-AITM |
SNAP 2-Ch Type E, J, K Thermocouple or -150mV to +150mV Analog Input Module |
| SNAP-AITM-2 |
SNAP 2-Ch Type B,C,D,G,N,T,R, or S Thermocouple Analog Input Module |
| SNAP-AITM2-i |
SNAP 2-Ch Isolated Type B,C,D,G,N,T,R, or S Thermocouple Analog Input Module |
| SNAP-AITM-4i |
SNAP 4-Ch Isolated Type B, C, D, E, G, J, K, N, R, S, or T Thermocouple or or +/-150, +/-75, +/-50, or +/-25 mV Analog Input Module |
| SNAP-AITM-8 |
SNAP 8-Ch Type B, C, D, E, G, J, K, N, R, S, or T Thermocouple or +/-75, +/-50, or +/-25 mV Analog Input Module |
| SNAP-AITM-8-FM |
SNAP 8-Ch Type B, C, D, E, G, J, K, N, R, S, or T Thermocouple or +/-75, +/-50, or +/-25 mV Analog Input Module, Factory Mutual Approved |
| SNAP-AITM-i |
SNAP 2-Ch Isolated Type E,J, or K Thermocouple Analog Input Module |
| SNAP-AIV |
SNAP 2-Ch -10VDC to +10VDC Analog Input Module |
| SNAP-AIV2-i |
SNAP 2-Ch Isolated -100VDC to +100VDC Analog Voltage Input Module |
| SNAP-AIV2-iL |
2-CHANNEL ANALOG INPUT ISOLATED +/- 100VDC (SPECIAL CALIBRATION 10hz Default Mode 20) |
| SNAP-AIV-32 |
SNAP 32-Ch -10VDC to +10VDC Analog Input Module |
| SNAP-AIV-32-FM |
SNAP 32-Ch -10VDC to +10VDC Analog Input Module, Factory Mutual Approved |
| SNAP-AIV-4 |
SNAP 4-Ch -10VDC to +10VDC Analog Input Module |
| SNAP-AIV-8 |
SNAP 8-Ch -10VDC to +10VDC Analog Input Module |
| SNAP-AIV-HDB |
Breakout Board for SNAP-AIV-32 Analog Input Module |
| SNAP-AIV-HDB-FM |
Breakout Board for SNAP-AIV-32 Analog Input Module, Factory Mutual Approved |
| SNAP-AIV-i |
SNAP 2-Ch Isolated -10VDC to +10VDC Analog Voltage Input Module |
| SNAP-AIVRMS |
SNAP 2-Ch 0-250 V RMS AC/DC Analog Input Module |
| SNAP-AIVRMS-i |
SNAP Isolated 2-Ch 0-250 V RMS AC/DC Analog Input Module |
| SNAP-AIVRMS-i-FM |
SNAP Isolated 2-Ch 0-250 V RMS AC/DC Analog Input Module, Factory Mutual Approved |
| SNAP-AOA-23 |
SNAP 2-Ch 4-20 mA Current Loop Analog Output Module |
| SNAP-AOA-23-iH |
Isolated two-channel analog current output, HART communication, 4-20mA |
| SNAP-AOA-23-iSRC |
Isolated SNAP 2-Ch 4-20 mA Current Loop Analog Output Module, with Loop Sourcing |
| SNAP-AOA-23-iSRC-FM |
Isolated SNAP 2-Ch 4-20 mA Current Loop Analog Output Module, with Loop Sourcing, Factory Mutual Approved |
| SNAP-AOA-28 |
SNAP 2-Ch 0-20 mA Current Loop Analog Output Module |
| SNAP-AOA-3 |
SNAP 1-Ch 4-20 mA Current Loop Analog Output Module |
| SNAP-AOD-29 |
SNAP 2-Ch 5-60 VDC Time-Proportional Digital Output Module |
| SNAP-AOD-29-HFi |
SNAP Isolated 2-Ch Analog TPO or PWM Output, 2.5 to 24 VDC, 0 to 100 kHz |
| SNAP-AOV-25 |
SNAP 2-Ch 0-10 VDC Analog Voltage Output Module |
| SNAP-AOV-27 |
SNAP 2-Ch -10 to +10VDC Bipolar Analog Voltage Output Module |
| SNAP-AOV-5 |
SNAP 1-Ch 0-10VDC Analog Voltage Output Module |
| SNAP-AOVA-8 |
SNAP 8-ch analog multifunction output, voltage or current |
| SNAP-ARL-ASDS-2 |
ARM920T OEM BRAIN-ASDS |
| SNAP-B12M |
SNAP B-Series 12-module Rack |
| SNAP-B12MC |
SNAP B-Series 12-module Rack with Extra Terminal Block |
| SNAP-B12MC-P |
SNAP B-Series 12-module Rack with Extra Pluggable Terminal Block |
| SNAP-B16M |
SNAP B-Series 16-module Rack |
| SNAP-B16MC |
SNAP B-Series 16-module Rack with Extra Terminal Block |
| SNAP-B16MC-P |
SNAP B-Series 16-module Rack with Extra Pluggable Terminal Block |
| SNAP-B3000-ENET |
SNAP Ethernet I/O Brain - Analog/Digital/Serial |
| SNAP-B3000-MODBUS |
SNAP Analog/Digital Brain, Modicon Modbus Protocol |
| SNAP-B4 |
SNAP 32-channel Pamux Protocol Digital Brain Board |
| SNAP-B4M |
SNAP B-Series 4-module Rack |
| SNAP-B8M |
SNAP B-Series 8-module Rack |
| SNAP-B8MC |
SNAP B-Series 8-module Rack with Extra Terminal Block |
| SNAP-B8MC-P |
SNAP B-Series 8-module Rack with Extra Pluggable Terminal Block |
| SNAP-BRS |
SNAP 32-channel Mistic Protocol Remote Digital Brain Board |
| SNAP-CDBBDIN |
Classic Digital Brain Board DIN Rail Adapter |
| SNAP-D12M |
SNAP D-Series 12-module Rack |
| SNAP-D12MC |
SNAP D-Series 12-module Rack With Extra Terminal Block |
| SNAP-D12MC-P |
SNAP D-Series 12-module Rack With Extra Pluggable Terminal Block |
| SNAP-D4M |
SNAP D-Series 4-module Rack |
| SNAP-D4MC |
SNAP D-Series 4-module Rack With Extra Terminal Block |
| SNAP-D4MC-P |
SNAP D-Series 4-module Rack With Extra Pluggable Terminal Block |
| SNAP-D64RS |
SNAP 64-point Digital-only Rack |
| SNAP-D6M |
SNAP D-Series 6-module Rack |
| SNAP-D6MC |
SNAP D-Series 6-module Rack With Extra Terminal Block |
| SNAP-D6MC-P |
SNAP D-Series 6-module Rack With Extra Terminal Block For Field Wiring, Pluggable |
| SNAP-D8M |
SNAP D-Series 8-module Rack |
| SNAP-D8MC |
SNAP D-Series 8-module Rack With Extra Terminal Block |
| SNAP-D8MC-P |
SNAP D-Series 8-module Rack With Extra Pluggable Terminal Block |
| SNAP-ENET-D64 |
SNAP Ethernet I/O Brain - Digital-only |
| SNAP-FIELDCONB |
SNAP Module Field Connector 10-pack |
| SNAP-FUSE10AB |
10-AMP FUSE 25 PAK |
| SNAP-FUSE1AB |
SNAP 1-Amp Fuse, 25 Pack |
| SNAP-FUSE1AC |
SNAP 1-Amp Fuse for Breakout Racks, 25 Pack |
| SNAP-FUSE2AB |
SNAP 2-Amp Fuse, 25 Pack |
| SNAP-FUSE4AB |
SNAP 4-Amp Fuse, 25 Pack |
| SNAP-FUSE7.5AB |
SNAP 7.5 Amp Fast Acting Mini Fuse, 25-pack |
| SNAP-HD-20F6 |
High Density Wiring Harness, 20 conductors, Flying leads, 6 feet in length |
| SNAP-HD-ACF6 |
Wiring harness assembly with flying leads for SNAP 16-channel I/O modules - 6 ft. (1.8 m) |
| SNAP-HD-BF1 |
Header Cable for 32 Channel Modules & breakout racks 11.50 inches long |
| SNAP-HD-BF6 |
Header cable for SNAP 32-channel modules and breakout racks - 6 ft. (1.8 m) |
| SNAP-HD-CBF6 |
Wiring harness with flying leads for SNAP 32-channel I/O modules - 6 ft. (1.8 m) |
| SNAP-HD-G4F6 |
Header cable for SNAP 32-channel digital modules and G4 digital racks, 6 ft. (1.8 m) |
| SNAP-HD-G4F6N |
Header cable for SNAP-IDC-32N modules and G4 digital racks, 6 ft. (1.8 m) |
| SNAP-IAC-16 |
SNAP isolated 16-pt digital (discrete) input module, 90-140 VAC/VDC |
| SNAP-IAC5 |
SNAP 4-Ch 90-140 VAC/VDC Digital (Discrete) Input Module |
| SNAP-IAC5A |
SNAP 4-Ch 180-280 VAC/VDC Digital (Discrete) Input Module |
| SNAP-IAC5AFM |
SNAP 4-Ch 180-280 VAC/VDC Digital (Discrete) Input Module, Factory Mutual approved |
| SNAP-IAC5FM |
SNAP 4-Ch 90-140 VAC/VDC Digital (Discrete) Input Module, Factory Mutual approved |
| SNAP-IAC5MA |
SNAP 4-Ch Isolated 90-140 VAC/VDC Digital (Discrete) Input Module with Manual/Auto Switches |
| SNAP-IAC-A-16 |
SNAP isolated 16-pt digital (discrete) input module, 180-280 VAC/VDC |
| SNAP-IDC-16 |
SNAP Isolated 16-pt Digital (Discrete) Input Module, 10-32 VDC |
| SNAP-IDC-32 |
SNAP 32-channel Digital (Discrete) Input Module, 10-32 VDC |
| SNAP-IDC-32D |
SNAP 32-channel Digital (Discrete) Input Module, 2.5 to 12 VDC |
| SNAP-IDC-32DN |
SNAP 32-channel Digital (Discrete) Input Module, -2.5 to -12 VDC, with positive common connection |
| SNAP-IDC-32-FM |
SNAP 32-channel Digital (Discrete) Input Module, 10-32 VDC, Factory Mutual Approved |
| SNAP-IDC-32N |
SNAP 32-channel Digital (Discrete) Input Module, -10 to -32 VDC, with positive common connection |
| SNAP-IDC5 |
SNAP 4-Ch 10-32 VAC/VDC Digital (Discrete) Input Module |
| SNAP-IDC5D |
SNAP 4-Ch 2.5-28 VDC Digital (Discrete) Input Module |
| SNAP-IDC5DFM |
SNAP 4-Ch 2.5-28 VDC Digital Input Module, Factory Mutual approved |
| SNAP-IDC5-FAST |
SNAP 4-Ch High-Speed 2.5 - 16VDC Digital (Discrete) Input Module |
| SNAP-IDC5-FAST-A |
SNAP 4-Ch High-Speed 18-32 VDC Digital (Discrete) Input Module |
| SNAP-IDC5FM |
SNAP 4-Ch 10-32 VDC Digital (Discrete) Input Module, Factory Mutual approved |
| SNAP-IDC5G |
SNAP 4-Ch 35-75 VAC/DC Digital (Discrete) Input Module |
| SNAP-IDC5-HT |
SNAP 4-Ch Leakage-Tolerant 15-32 VDC Digital Input Module |
| SNAP-IDC5MA |
SNAP 4-Ch Isolated 10-32 VDC/VAC Digital (Discrete) Input Module with Manual/Auto Switches |
| SNAP-IDC5Q |
SNAP 2-Axis Quadrature Position Input Module |
| SNAP-IDC5-SW |
SNAP 4-Ch Contact Status Input Module, Normally Open |
| SNAP-IDC5-SW-NC |
SNAP 4-Ch Contact Status Input Module, Normally Closed |
| SNAP-IDC-HDB |
Fused breakout rack for SNAP 32-channel digital (discrete) input module |
| SNAP-IDC-HDB-FM |
Fused breakout rack for SNAP 32-channel digital (discrete) input module, Factory Mutual approved |
| SNAP-IDC-HT-16 |
SNAP isolated 16-pt digital (discrete) input module, leakage tolerant, 15-28 VDC |
| SNAP-IT-PM12 |
SNAP PAC System 12-module enclosure, NEMA 3R, metal, panel-mounted |
| SNAP-IT-RM16 |
SNAP PAC System 16-module enclosure, metal, rack-mounted |
| SNAP-IT-WM4 |
SNAP PAC System 4-module enclosure, NEMA 4, 4X, 6; IP66, IP67; polycarbonate, wall-mounted |
| SNAP-LCE |
SNAP Ethernet compact industrial controller for ioProject systems |
| SNAP-LCM4DIN |
SNAP-LCM4 DIN-rail Adapter |
| SNAP-MODFUSEHLDRB |
SNAP Digital Output Module Fuse Holder, 10 Pack |
| SNAP-MODLATCHB |
SNAP Module Release Latch, 10-pack |
| SNAP-MODTOOL |
SNAP I/O Module Removal Tool (10 Pack) |
| SNAP-MR10 |
SNAP Replacement Mechanical Relay for Breakout Boards, 10 A |
| SNAP-OAC5 |
SNAP 4-Ch 12-250 VAC Digital (Discrete) Output Module |
| SNAP-OAC5FM |
SNAP 4-Ch 12-250 VAC Digital (Discrete) Output Module, Factory Mutual Approved |
| SNAP-OAC5-I |
SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module |
| SNAP-OAC5-IFM |
SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module, FM Approved |
| SNAP-OAC5MA |
SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module with Manual/Auto Switches |
| SNAP-ODC-32-SNK |
SNAP 32-channel Digital (Discrete) Output Module, 5-60 VDC Load Sinking |
| SNAP-ODC-32-SNK-FM |
SNAP 32-channel Digital (Discrete) Output Module, 5-60 VDC Load Sinking, Factory Mutual Approved |
| SNAP-ODC-32-SRC |
SNAP 32-channel Digital (Discrete) Output Module, 5-60 VDC Load Sourcing |
| SNAP-ODC-32-SRC-FM |
SNAP 32-channel Digital (Discrete) Output Module, 5-60 VDC Load Sourcing, Factory Mutual Approved |
| SNAP-ODC5A-I |
SNAP 4-Ch Isolated 5-200 VDC Digital (Discrete) Output Module |
| SNAP-ODC5A-IFM |
SNAP 4-Ch Isolated 5-200 VDC Digital (Discrete) Output Module, FM Approved |
| SNAP-ODC5ASNK |
SNAP 4-Ch 5-200 VDC Digital (Discrete) Output Module, Load Sinking |
| SNAP-ODC5-I |
SNAP 4-Ch Isolated 5-60 VDC Digital (Discrete) Output Module |
| SNAP-ODC5-IFM |
SNAP 4-Ch Isolated 5-60 VDC Digital (Discrete) Output Module, FM Approved |
| SNAP-ODC5MA |
SNAP 4-Ch Isolated 5-60 VDC Digital (Discrete) Output Module with Manual/Auto Switches |
| SNAP-ODC5R |
SNAP 4-Ch Reed Relay Digital (Discrete) Output Module, Normally Open |
| SNAP-ODC5R5 |
SNAP 4-Ch Reed Relay Digital (Discrete) Output Module, Normally Closed |
| SNAP-ODC5R5FM |
SNAP 4-Ch Reed Relay Digital (Discrete) Output Module, Normally Closed, Factory Mutual Approved |
| SNAP-ODC5RFM |
SNAP 4-Ch Reed Relay Digital (Discrete) Output Module, Normally Open, Factory Mutual Approved |
| SNAP-ODC5SNK |
SNAP 4-Ch 5-60 VDC Digital (Discrete) Output Module, Load Sinking |
| SNAP-ODC5SNKFM |
SNAP 4-Ch 5-60 VDC Digital (Discrete) Output Module, Load Sinking, Factory Mutual Approved |
| SNAP-ODC5SRC |
SNAP 4-Ch 5-60 VDC Digital (Discrete) Output Module, Load Sourcing |
| SNAP-ODC5SRCFM |
SNAP 4-Ch 5-60 VDC Digital (Discrete) Output Module, Load Sourcing, Factory Mutual Approved |
| SNAP-ODC-HDB |
Fused breakout rack for SNAP 32-channel digital (discrete) output modules |
| SNAP-ODC-HDB-FM |
Fused breakout rack for SNAP 32-channel digital (discrete) output modules, Factory Mutual approved |
| SNAP-OMR6-C |
SNAP Isolated 4-channel Mechanical Power Relay Output Module, Form C |
| SNAP-OMR6T-C |
SNAP Isolated 4-channel Mechanical Power Relay Output Module, Form C, with Integrated Transient Suppression |
| SNAP-PAC-BATTERY-ML2430 |
Replacement backup battery for SNAP PAC controllers and brains |
| SNAP-PAC-EB1 |
SNAP PAC Ethernet Brain, analog/digital/serial, with high-speed digital functions |
| SNAP-PAC-EB1-FM |
SNAP PAC Ethernet Brain, analog/digital/serial, with high-speed digital functions, Factory Mutual approved |
| SNAP-PAC-EB2 |
SNAP PAC Ethernet Brain, analog/digital/serial |
| SNAP-PAC-EB2-FM |
SNAP PAC Ethernet Brain, analog/digital/serial, Factory Mutual approved |
| SNAP-PACLC |
SNAP PAC Learning Center |
| SNAP-PAC-R1 |
SNAP PAC R-series Programmable Automation Controller - On-the-rack - REST API - Analog, full digital, serial |
| SNAP-PAC-R1-B |
SNAP PAC R-series Programmable Automation Controller - B-series rack - REST API - Analog, full digital, serial |
| SNAP-PAC-R1-FM |
SNAP PAC R-series Programmable Automation Controller - On-the-rack - REST API - Analog, full digital, serial; Factory Mutual approved. |
| SNAP-PAC-R2 |
SNAP PAC R-series Programmable Automation Controller - On-the-rack - REST API - Analog, simple digital, serial |
| SNAP-PAC-R2-FM |
SNAP PAC R-series Programmable Automation Controller - On-the-rack - REST API - Analog, simple digital, serial; Factory Mutual approved |
| SNAP-PAC-RCK12 |
SNAP PAC 12-Module Mounting Rack |
| SNAP-PAC-RCK12-FM |
SNAP PAC 12-Module Mounting Rack, Factory Mutual Approved |
| SNAP-PAC-RCK16 |
SNAP PAC 16-Module Mounting Rack |
| SNAP-PAC-RCK16-FM |
SNAP PAC 16-Module Mounting Rack, Factory Mutual Approved |
| SNAP-PAC-RCK4 |
SNAP PAC 4-Module Mounting Rack |
| SNAP-PAC-RCK4-FM |
SNAP PAC 4-Module Mounting Rack, Factory Mutual Approved |
| SNAP-PAC-RCK8 |
SNAP PAC 8-Module Mounting Rack |
| SNAP-PAC-RCK8-FM |
SNAP PAC 8-Module Mounting Rack, Factory Mutual Approved |
| SNAP-PAC-S1 |
SNAP PAC S-series Programmable Automation Controller for Ethernet Networks - REST API |
| SNAP-PAC-S1-FM |
SNAP PAC S-series Programmable Automation Controller for Ethernet Networks - REST API - Factory Mutual Approved |
| SNAP-PAC-S2 |
SNAP PAC S-series Programmable Automation Controller with Four Serial Ports |
| SNAP-PAC-SB1 |
SNAP PAC Serial Brain, analog/digital, with high-speed digital functions |
| SNAP-PAC-SB2 |
SNAP PAC Serial Brain, analog/digital |
| SNAP-pH/ORP |
SNAP-pH/ORP Differential Voltage Measurement Input Module |
| SNAP-PS24 |
SNAP Power Supply, 110 VAC to 24 VDC |
| SNAP-PS24U |
SNAP Power Supply, 100-250 VAC to 24 VDC |
| SNAP-PS5 |
SNAP Power Supply, 110 VAC to 5 VDC |
| SNAP-PS5-24DC |
SNAP Power Supply, 24 VDC input, 5 VDC output |
| SNAP-PS5U |
SNAP Power Supply 100-250 VAC to 5 VDC |
| SNAP-PSDIN |
SNAP Power Supply and Controller DIN-rail Adapter |
| SNAP-PSUDIN |
SNAP Power Supply DIN-rail Adapter |
| SNAP-RACKDIN |
SNAP Rack DIN-rail Adapter Clip |
| SNAP-RACKDINB |
SNAP Rack DIN-rail Adapter Clip, 25-pack |
| SNAP-RCK-B2M |
Adapter for using legacy SNAP brain on SNAP PAC or SNAP M-series mounting racks |
| SNAP-RCK-M2B |
Adapter for using SNAP PAC or SNAP M-series brains on SNAP B-series mounting racks |
| SNAP-ROKDIN |
DIN-Rail Adapter for SNAP-PAC-SRA Arbiter or SNAP-RPSW Redundant Power Switch |
| SNAP-S2DIN |
SNAP-PAC-S2 DIN Rail Adapter |
| SNAP-SCM-232 |
SNAP 2-Ch RS-232 Serial Communication Module |
| SNAP-SCM-485-422 |
SNAP 2-Ch RS-485/422 (2-wire or 4-wire) Serial Communication Module |
| SNAP-SCM-BB4 |
SNAP Motion Control Breakout Board, 4 Axes, Stepper |
| SNAP-SCM-CAN2B |
SNAP CAN (Controller Area Network) Communication Module |
| SNAP-SCM-MCH16 |
SNAP Motion Control Host Communication Module, 16 Axes |
| SNAP-SCM-PROFI |
SNAP PROFIBUS Module |
| SNAP-SCM-SSI |
SNAP SSI (Serial Synchronous Interface) Module |
| SNAP-SCM-ST2 |
Pulse & Direction Digital Outputs X2 |
| SNAP-SCM-W2 |
SNAP 2-Ch Wiegand Interface Serial Communication Module |
| SNAP-SCREW |
SNAP I/O Module Hold-down Screws, 100-pack |
| SNAP-STRAPB |
SNAP Jumper Strap for Digital I/O Modules with 8-wire Connector, 10-pack |
| SNAP-STRAP-OMR |
SNAP Jumper Strap for SNAP-OMR Modules with a 12-wire Connector |
| SNAP-TEX-32 |
32-Point Breakout Board for SNAP I/O Modules |
| SNAP-TEX-CBE6 |
8-wire Cable for SNAP I/O Modules, Even Terminals Connected |
| SNAP-TEX-CBO6 |
8-wire Cable for SNAP I/O Modules, Odd Terminals Connected |
| SNAP-TEX-CBS6 |
8-wire Cable for SNAP I/O Modules, Straight-through Wiring |
| SNAP-TEX-DRC10 |
SNAP PAC Rack DIN-rail Adapter Clips-10 Pack |
| SNAP-TEX-FB16-H |
16-Point Breakout Board for SNAP I/O with Fuses and Bussed Power (120-240 V) |
| SNAP-TEX-FB16-L |
16-Point Breakout Board for SNAP I/O with Fuses and Bussed Power (12-24 V) |
| SNAP-TEX-MR10-16 |
16-Point Breakout Board with Mechanical Relays for SNAP Digital Output Modules |
| SNAP-TEX-MR10-16C |
16-Point Breakout Board with Mechanical Relays and Header Connector, for High-Density Digital Output Modules |
| SNAP-TEX-MR10-4 |
4-Point Breakout Board with Mechanical Relays for SNAP Digital Output Modules |
| SNAP-TEX-RCKCAP |
SNAP PAC Rack Connector Cap, Pack of 16 |
| SNAP-TEX-REC10N |
Narrow End Caps, 10 Pack with Screws, for B-series Racks |
| SNAP-TEX-REC10W |
Wide End Caps, 10 Pack with Screws, for SNAP PAC and M-series Racks |
| SNAP-UDC-HDB |
Compact breakout rack for SNAP 32-channel digital (discrete) input or output module |
| SNAP-UDC-HDB-G4 |
G4 I/O breakout board for one SNAP 32-point digital module |
| SNAP-UP1-ADS |
SNAP Ultimate controller/brain, analog/digital/serial, for ioProject systems |
| SNAP-UP1-D64 |
SNAP Ultimate controller/brain, digital only, for ioProject systems |
| SNAP-UP1-M64 |
SNAP Ultimate controller/brain, analog/simple digital/serial, for ioProject systems |
| SNAP-WIRESTRAPB |
SNAP Jumper Connector for Digital I/O (10 PACK) |
| SOFTPAC |
SoftPAC Software-based Programmable Automation Controller |
| SSR-HS |
Solid State Relay (SSR) Heatsink for Power Series Standard Model |
| SSR-THERMOPAD |
Thermal conductive pad for Power Series SSR heatsink, 10 pack |
| STRAP2 |
2-position Strap, Single Rack R0433 |
| STRAP2Q |
2-position Strap Quad Rack |
| STRAP4Q |
4-position Strap Quad Rack |
| STRAP8 |
8-position Strap, Single Rack R0430 |
| TERM 1 |
Pamux Bus Termination Card |
| TERM 2 |
Pamux Bus Terminaton Card Shielded Cable |
| Z120D10 |
Z Model, 120 VAC, 10 Amp, DC Control Solid State Relay (SSR) |
| Z240D10 |
Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR) |
| Z240D10-17 |
Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR), Replacement Part Only |
